Advanced Peek Engineering Material for Precision Gear Manufacturing

Product Description

Product Description

PEEK Pure Resin Series Non-reinforced LC601

PEEK Pure Resin is a thermoplastic polymer. It belongs to unreinforced materials with excellent heat resistance, toughness, and strength, capable of operating at temperatures up to 250°C.

Specification

No	Items	Unit	Test conditions	Test Method	Carbon fiber series
Physical Properties					PEEK LC601
1	Relative Density	g/cm³		ISO 1183	1.29-1.31
2	Melt Flow Rate	g/10min			0.5-30
3	Melting Point	°C		ISO 11357	340±5
	Melt Viscosity	Pas		ISO 11443	300
4	Mechanical Properties
5	Tensile Strength	Mpa		ISO 527	≥80
6	Elongation at Break	Percentage		ISO 527	0-50
7	Shore hardness			ISO 868	≥88
8	Bending Strength	Mpa		ISO 178	≥100
9	Tensile Modulus	Gpa		ISO  527	7.5
10	Flexural Modulus	Gpa		ISO 178	3.4
11	Cantilever beam impact strength(with notch)	KJ/m²			≥11
	Flammability Rating	N/a		UL94	v.0/1.6mm
12	Thermal Properties
13	Continuous Use Temperature	°C			260
14	Heat Deflection Temperature	°C(1.82Mpa)		ISO  75-f	150
15	Coefficient of Thermal Expansion	-10∧-5/°C		ISO 11359	12-20
16	Electrical Properties
17	Relative Permittivity	10∧3HZ			2-4
18	Dielectric Loss Tangent	10∧6HZ			<0.005
19	Glass Transition Temperture	°C		ISO11357	143
20	Molding Shrienkage	Percentage		ISO 294-4	1/1.3
21	Application				Wire Extursion
The above data are for testing purposes only and should be used as a reference for material selection, not as specifications.

Scope Of Application

Electromagnetic wire: atomic energy, aircraft, ships, oil and gas wells, electromagnetic wires, optical fibers

Thin film: insulating film for electric shock, generators, transformers, etc.; flexible printed circuit boards, carrier tapes, composite materials, heat-resistant and chemical-resistant ring belts.

Fiber: drying canvas for paper machinery, heat-resistant cloth, racket strings, composite materials, heat and chemical resistant textile tapes, etc.

Wear-resistant materials: bearing cages, metal bearing liners, clutch parts, vacuum parts for power brakes, engine parts, pulley loader blades, copy machine parts suspension bushings, piston skirts, engine push rods, etc.

Electrical and Electronic Components: Embedded plugs, high-reliability connection modules, cable connectors, junction boxes, wiring terminals, cage coils for electrodes, battery enclosures, IC packaging, etc.

Hot water equipment: used for manufacturing hot water, pump body and impeller of chemical pump and other parts, steam valve, O-ring, connectors for oil extraction, boiler and PH-designed sheath, etc.

Powder Coating Products: Heat-resistant and corrosion-resistant coatings applied to metal surfaces through electrostatic spraying or fluidized bed spraying methods.

Company Profile

Ningbo Polymer Materials Co., Ltd

Our main plastic raw materials include: General-purpose plastics, Engineering plastics, Modified plastics, Elastomer plastics, Specialty engineering materials, and Modified toughening compatibilizers.
General Purpose Plastics:ABS CPE EAA EVA LDPE LLDPE PET PP PVC.
Engineering Plastics:PA6 PA66 PC PC/ABS PCTG PETG POM
Elastomer Plastics:EMA EMMA CPE POE POP SBS SEBS TPE TPEE TPU TPV
Special Engineering Plastics:COC CPVC LCP PA12 PEEK PEI PES  PTFE SMMA
Toughening Compatibilizer:Grafted PP, Grafted PE, Grafted EVA, Grafted POE, Grafted SEBS
Modified Alloy Plastic:PP Glass Fiber ReinforcedPA Glass Fiber Reinforced  ABS/PA ABS/PBT  ABS/PC ASA/PC
PA66/PTFE  PA66/C/PTFE PA66/F/PTFE  PA12 Eyeglass Frames/Legs Special Material for Cost Reduction